Thanos - Marvel Hueforge
I Designed a friction Fit Frame that can be found here for 200x200 Hueforges
https://makerworld.com/en/models/381229#profileId-281475
And if you use the other profile I have frames for 100x100 or 150x150 here:
https://makerworld.com/en/models/173529#profileId-190705
My attached print profile has plates for both a 150x150 and a 200x200mm model. Please make sure that you select the one that you want to print.
The rest of my comic hueforge collection can be found here:
https://makerworld.com/en/u/4065522623/collections/549689
I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display.
If you use my profile, but try and change the layer heights you will need to use the mm measurements instead of the layer number because of this adaptive layer height.
If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position
Please post a picture of your printed copy! I'd love to see it!
— Printing Instructions---
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Silver
At layer #20 (1.68mm) swap to Jade White for the rest.