I made a Hueforge Picture from the Eye of Sauron.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Yellow Transmission Distance: 10

Swap Instructions:
Start with Black
At layer #6 (0.64mm) swap to Red
At layer #13 (1.2mm) swap to Orange
At layer #16 (1.44mm) swap to Yellow for the rest

I would be happy for a like and a comment ;)