XBOX Controller Stand

I really loved the controller stand from Foxwood (https://makerworld.com/en/models/775269-controller-stand-core-swappable-deco-sleeves#profileId-711748) and others of similiar great design but all of them had the issue that the indentations for the controller were not deep enough, so that the controller would fall out of the stand if touched or if the stand itself was moved. So i decided to model the whole thing from scratch in Shapr3D by myself.

The new stand now has much deeper indentations to allow for a much better fit and stability. I added a groove in the middle of the base to save on filament. I also created a version of the base with the XBOX logo, so that it's always clear which controller goes into which dock. 

I removed the original logos so that my model would not infringe copyright law as well as the makerworld exclusive model license. 

Note: The XBOX controller base does NOT fit the XBOX elite controller. 

Important: if you print the sleeves in PETG, you will most likely have to file down the notches on the controller base a little in order to make the sleeve fit. 

A new LED Light option is now available for this controller and can be found here: https://makerworld.com/en/models/3065368-xbox-led-controller-stand#profileId-3450201

Available Sleeve designs (will be updated reguarly:)

• Original 

  

• Arc 

  

• StarWars 

  

• Quadro
  

• Angled Slats
  

Note: Due to the specific shape of the XBOX controller, you need to apply light force and the controller will “snap” into the base with a nice snug fit. You can even turn it upside down and the controller won't fall out :) 

Update: 

• Jan 26: Due to your input I added an additional version of the xBox base which has a very loose fit. 
• New: all Logos are not separate parts which can be colored separately using the color fill tool 

The following single base models are also available:

• XBox One/S: https://makerworld.com/en/models/2309169-xbox-controller-stand#profileId-2520822
• XBox 360: https://makerworld.com/en/models/2425082-xbox-360-controller-stand#profileId-2659776
• Original Xbox: https://makerworld.com/en/models/2828997-original-xbox-controller-stand#profileId-3151808
• PS3: https://makerworld.com/en/models/2504451-controller-stand-for-ps3#profileId-2753546
• PS4: https://makerworld.com/en/models/2429222-controller-stand-for-ps4#profileId-2664671
• PS5: https://makerworld.com/en/models/2309147-ps5-controller-stand#profileId-2520796
• Switch Pro 1: https://makerworld.com/en/models/2429600-switch-pro-1-controller-stand#profileId-2665097
• Switch Pro 2: https://makerworld.com/en/models/2442152-switch-pro-2-controller-stand#profileId-2680071
• Meta Quest 3: https://makerworld.com/de/models/2396844-meta-quest-3-controller-stand#profileId-2626633
• 8Bitdo 64: https://makerworld.com/en/models/2514299-8bitdo-64-controller-stand#profileId-2765424
• Nintendo Joy-Con Grip available on Makerworld (https://makerworld.com/en/models/1864709-joycon-controller-grip?from=search#profileId-1994974) : https://makerworld.com/en/models/2542092-joycon-controller-grip-stand#profileId-2798856
• Gamesir Cyclone 2: https://makerworld.com/en/models/2728429-gamesir-cyclone-2-controller-stand#profileId-3023577
• Nintendo JoyCon Grip: https://makerworld.com/en/models/2728400-nintendo-joycon-controller-stand#profileId-3023544
• Steam (2015): (NOT COMPATIBLE with the standard base and sleeve, uses a slightly bigger base and sleeve due to the large size of the V1 controller) - https://makerworld.com/en/models/2769452-steam-controller-stand#profileId-3076025. Can not be mixed with my other bases
• Steam (2026): https://makerworld.com/en/models/2788119-steam-2026-controller-stand#profileId-3099811
• Thrustmaster ESwap Pro: https://makerworld.com/en/models/2807591-thrustmaster-controller-stand#profileId-3124408
• 8BitDo Pro 2: https://makerworld.com/en/models/2862935-8bitdo-pro-2-controller-stand#profileId-319520
• Nintendo Power A: https://makerworld.com/en/models/2866966-nintendo-power-a-controller-stand#profileId-3200278
• EasySMX X20: https://makerworld.com/en/models/2943053-easysmx-x20-controller-stand#profileId-3296307

I also designed a dual and triple stand if you have multiple controllers. This can be found here: https://makerworld.com/en/models/2309245-dual-controller-stand-for-xbox-and-ps5#profileId-2520916