Mini Brick Clogs

*This is a fan art creation. All rights goes to the respective companies, owners and contributors. This model is intended for personal use and is not affiliated or associated with either company.

Inspired by the recent collaboration I modeled this for fun. It is a mini version that can be used for a key chain or just for some fun.

• Static version works well for a key chain. 
• Movable version has the strap separated out for Sport or Relaxed mode.
• Separate print profile for AMS or pause at layer for manual color change. *You will need to set up the pause.
• Either static or movable version have objects that can be selected for color painting in the slicer if you choose.
• Print out various colors and change out the straps!

Overall dimensions: (Main body is intended to be close to a 4x2 brick)

• 31.5mm deep
• 15.5mm wide
• 11.5mm tall

Tips:

• I had some drooping on the holes for the strap on the main body. Had to use a exacto knife to open it up a bit for the strap to sit properly.

Prints in the images are done in matte PLA.

Main print profile has 2 plates, 1 for the movable strap and 1 for static strap.

Print profiles are standard .2 high quality resolution. I have supports enabled on the underside of the main body but may not be needed.