Dust Cover Bambulab lower bearing Z-Axis P1P/P1S/X1/X1C Ball bearing cap below Kugellager Schutz by Heiko_Hoffmann2000

Heiko_Hoffmann2000

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 15% infill

Designer

12 min

1 plate

4.4(50)

Archimedian Curves for flexibility in installation0.2mm layer, 3 walls, 15% infill

13 min

1 plate

4.6(20)

Open in Bambu Studio

Boost

167

365

609

491

Released

Description

Schutzkappe für das Kugellager der Z-Achse am Boden.
Mit einem erhöhtem Aussenring, damit es besser auf dem Kugellager aufsitzt und somit das Fett gut schützt darunter.
Einfach auseinander spreitzen und um die Gewindestange machen.
Farblich kann es selber angepasst werden.
Schnell und einfach gedruckt und bietet einen guten Schutz für das Kugellager an, somit kommt weniger Staub und Dreck in das Kugellager und das Fett ist dadurch viel besser geschützt.
Beidseitig verwendbar siehe auf dem Foto.

= = = = = = = = = = = = = = = = = = = = = = = = = = =

Protective cap for the Z-axis ball bearing on the floor. With a raised outer ring so that it sits better on the ball bearing and thus protects the grease underneath. Simply spread it apart and make it around the threaded rod. You can customize the color yourself. Printed quickly and easily and offers good protection for the ball bearing, so less dust and dirt gets into the ball bearing and the grease is therefore much better protected. Can be used on both sides, see photo.

Comment & Rating (77)

@user_4093079595

Print Profile

0.2mm layer, 3 walls, 15% infill

Good

@FGStar

Print Profile

0.2mm layer, 3 walls, 15% infill

👍

(Edited)

@manuziloop

Print Profile

0.2mm layer, 3 walls, 15% infill

Nice design !

@wszqmrg4vk

Print Profile

Archimedian Curves for flexibility in installation0.2mm layer, 3 walls, 15% infill

Awesome design- fits perfectly. Used the Archimedes infill. Thank You!

@bing

Print Profile

0.2mm layer, 3 walls, 15% infill

printed nicely in clear petg, thanks!

@inorishizuka

Print Profile

Archimedian Curves for flexibility in installation0.2mm layer, 3 walls, 15% infill

nice

@user_1830585390

Great -Thanks!

@HCandeias

Print Profile

Archimedian Curves for flexibility in installation0.2mm layer, 3 walls, 15% infill

Não dou 5 estrelas porque para colocar as peças no sítio tive que as deformar e ficaram vincadas como se poder ver nas fotos.

@mlodybuk

Print Profile

0.2mm layer, 3 walls, 15% infill

@AstronomiCole

Print Profile

Archimedian Curves for flexibility in installation0.2mm layer, 3 walls, 15% infill

Printed fine, but kept getting stuck up under my bed and traveling up the screw along with it, so I removed them

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.