Hueforge design for the modern art of the Black Lotus card in Magic: the gathering.
Source & credits for the original picture : https://www.rahnart.com/black-lotus
Instructions :
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Basic Purple Transmission Distance: 1.4
PLA BambuLab Basic Magenta Transmission Distance: 3
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #22 (1.84mm) swap to Blue
At layer #28 (2.32mm) swap to Marine Blue
At layer #39 (3.2mm) swap to Lilac Purple
At layer #40 (3.28mm) swap to Purple
At layer #42 (3.44mm) swap to Magenta
At layer #44 (3.6mm) swap to Lilac Purple
At layer #48 (3.92mm) swap to Ivory White for the rest.
Happy printing !