Painter's Tape Dragger by PenPan Designs

PenPan Designs

Tools>Other Tools

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 20% infill

2.8 h

1 plate

4.8(6)

Open in Bambu Studio

Boost

Released

Description

A Tool for Straight and Flat Application of Painter's Tape on a Surface

This design is made for 1" Wide Painter's Tape. By holding one of the handles and pushing against a surface, the tape is flattened leaving no air pockets. Refer to the gif for how to use it.

I personally printed with 10% infill, no supports, and PLA. It should be printed on its backside so supports aren't necessary as orientated in the 3D model posted.

UPDATE
Added a hole on the backside so you can cut the tape from the other side

Comment & Rating (7)

@Leo.siwicki

Print Profile

0.2mm layer, 3 walls, 20% infill

printed very nice. now the real test is to see if it works for my painting job.

@JDesigns

files might be broken?

@Rockfootball47

Print Profile

0.2mm layer, 3 walls, 20% infill

Printed great with Kingroon PLA+. I just wish I had read the description a little better and realized the Frogtape I have is wider than 1" lol.

@Hoddl666

Print Profile

0.2mm layer, 3 walls, 20% infill

super

@EgotisticBAMF

Print Profile

0.2mm layer, 3 walls, 20% infill

This printed great. I works great. I used it all around the room before I painted and it was much easier than just using my hands. Thanks for the file.