Hueforge Skull Bookmark.
Print Settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic White Transmission Distance: 5
PLA BambuLab Basic White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Black
At layer #17 (1.44mm) swap to White
At layer #20 (1.68mm) swap to White for the rest.