Printed with .6mm nozzle in PLA with tree supports for only the faceplate (text facing up).
I suggest printing the sliders/switches in a different color than the baseplate
I also suggest color changing, or pausing and changing filaments, at the text layer for text to be more visible.
Large magnet spot for the back for a 25mm ceramic magnet. Other file is the same without the spot for the magnet on the back.
I used 4x2mm magnets (x9) so when the sliders move, they magnetize into place plus they give a satisfying feeling of it snapping into place like a switch.
Here are the magnets I used