• An ultra low profile stand for the Blue Snowball stand.
• 5/8"-27 mount for the mic.
• Just enough clearance to fully tilt the microphone on the screw.
• 70mm diameter base ensures the microphone won't tip or roll while still being a small footprint and low profile on your desk. Like a sturdy shadow.

Print Settings

Printer:

Ultimaker 2+

Rafts:

No

Supports:

No

Resolution:

0.06mm (As fine as you can for thread accuracy)
Recommend you use a fine resolution to ensure the threads are printed accurately as the screw is 5/8"-27.

Infill:

10% infill is fine. 20% will make it slightly stronger if you want.

Filament: unknown PLA Blue, Black (recommended you print in a colour that matches your microphone).
Printed at my local library so filament brand is unknown, but any PLA should be fine.

Overall print weight should be ~8g.

Post-Printing

Paint

Taped off the screw and painted the base black to match the microphone.

2 coats of acrylic matte black.

Tags: Audio, Gadgets, Microphones, etc.