davis.338lapua

cover

plate_1.png

plate_1.webp

PXL_20240304_134134852_f8cd134b-7766-41d1-b1a0-1e7743696e5a.webp

This is single plate version of the clock, it will you can print multi colour with out ams or with ams this will make the hand the same colour as the face of the clock.

0.2mm layer, 4 walls, 90% infill

plate_2.png

PXL_20240303_194612260_873c1b82-92e3-4b37-986d-88e32498f062.webp

plate_2.webp

Made with pla, hands broken into separate plates for for less filament changes.

1000002869_65ab2f4f-61ab-42b7-ae0a-42ce26807df6.webp

Optional base for the teaching clock, this fit off my print as a tight snap in fit to make the clock a little more robust. You'll need to make sure you have good bed adhesion to prevent lifting if you have concerns I would add a brim.

0.2mm layer, 2 walls, 10% infill

Clock for teaching time, This has the hand broken into a sperate plate since my daughter wanted everything a different colour. The numbers and ticks are raised so this can be printed in multiple colour's without a ams or with minimal colour changes with a ams.

Print Profile(3)

Description

Comment & Rating (86)

License

Related Models