Paintbrush + Water cup Holder by Rolrik

Rolrik

Hobby & DIY>Other Hobby & DIY

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

2.3 h

1 plate

4.5(8)

0.2mm layer, 2 walls, 15% infill

Designer

2.3 h

1 plate

5.0(1)

Boost

Released

Description

A Simple Paint Brush holder with water tank support.

Comment & Rating (14)

@Dewmrik

Print Profile

0.2mm layer, 2 walls, 15% infill

a little tough to get the legs in, but nice and snug after that.

@user_3608695222

one of the holes and one of the posts are slightly larger than the others. You have to match the right post with right position. Once I had figured that out no fitting issue but you might want to note that in the description.

The designer has replied

@Rolrik

Thanks for your comment, do you know the one is larger ?

@steveohim

what are the round holes for?

The designer has replied

@Rolrik

just optimizing the left space and material.

@Sighobbies

Print Profile

0.2mm layer, 2 walls, 15% infill

No issues printing

@TheAirds

Print Profile

0.2mm layer, 2 walls, 15% infill

Other Issues:The posts to hold everything together do not fit. I had to force them into place which ended up breaking the print.

The designer has replied

@Rolrik

Hello, sorry to hear that. the model is designed for glue-free fixing in force. You have to sand a little bit if the tolerances are not good. THANKS ** ADD new print Profile for tolerance

(Edited)