Search models, users, collections, and posts
Commodore Gamepad 1378 case for the Atari CX78+
IP Report
Print Profile(2)
Case with top and bottom in different colors
Designer
2.6 h
2 plates
Case with top and bottom in same color
Designer
2.5 h
1 plate
Open in Bambu Studio
Boost
7
15
4
2
12
1
Released
Description
The Gamepad 1378
In the tradition of the 1311, this gamepad also borrows a bit from Atari 
. The internals are from the CX78+ (wired). Of course, it works much better with the Commodore logo on it.
Assembly
- Remove the 6 screws, PCB, buttons, and D-pad from the donor CX78+.
- Be careful with the screws — they are very tiny. Store them in a safe place, as you will need them.
- Make sure the D-pad is oriented correctly (pointing upwards) in the new case.
- Install the PCB so it sits flat, with the corners positioned in the intended retaining points.
- Attach the back cover using the original 6 screws.
- Play 🙂
Tip: Use a small amount of (silicone) grease on the inside of the D-pad octagon. This will give an ever smoother operation.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (4)