Silica Dry Box for Bambu Lab AMS (Hydra and Stock)
Remixed by
Copyright Claim
Silica Dry Box for Bambu Lab AMS (Hydra and Stock)
Remixed by
Boost
93
189
104
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
9 h
1 plate
with top, 0.2mm layer, 2 walls, 15% infill
6.4 h
1 plate
Open in Bambu Studio
Boost
93
189
104
44
627
471
Released
Description
This Silica Box is for the AMS Hydra Mod, but it also works perfectly with the standard AMS.
It fits perfectly and the volume is larger than in other versions. There are also versions that support a Hygrometer. This is the Hygrometer I used https://www.amazon.de/dp/B0BKZXFDVX
I compared the humidity of the the hygrometer in the silica box with another one at the position of a spool. They show the same values.
Each box hold around 100g of silica.
Printing
The version without Hydrometer prints without any supports. The Hygrometer version needs some supports at the top of the round cutout. I used tree support that starts from the print plate. Works great.
Updates
- Update 22.7.2023
Fixed: Removed cover from version cutouts at 12am and 6am
- Update 14.7.2023
I added a version for the round hygrometer with cutouts at 12am and 6am
- Update 8.4.2023
I added a version supporting a rectangular hygrometer https://www.amazon.com/gp/product/B08P3NRH95
- Update 19.3.2023
I added openings on the side of the hygrometer cutout. More airflow is always good to have :) Thx makerdog for the idea.
Addons
Comment & Rating (104)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
nice
The designer has replied
1
Reply
where can i find the cap?
Thanks
0
Reply
Replying to @SerpoSK
Hello, this is the original https://www.printables.com/model/423765-silica-dry-box-for-bambu-lab-ams-hydra-and-stock-v
0
Reply
Replying to @blue_oblivion
I added the cap to the project file.
0
Reply
Print Profile
with top, 0.2mm layer, 2 walls, 15% infill
printed Perfect !
0
Reply
Print Profile
with top, 0.2mm layer, 2 walls, 15% infill
Great print. Thank you. I decided to just go with 3 of the same and they worked out perfect.
0
Reply
Print Profile
with top, 0.2mm layer, 2 walls, 15% infill
perfect print and lid close snugness is just right. CREALITY PETG on stock X1C
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Great job!
0
Reply
Print Profile
with top, 0.2mm layer, 2 walls, 15% infill
fits well !
0
Reply
Print Profile
with top, 0.2mm layer, 2 walls, 15% infill
passt perfekt!
0
Reply
Love em! One of the best mods for the AMS!
0
Reply
Boosted
Print Profile
with top, 0.2mm layer, 2 walls, 15% infill
Came out great, works as intended. Very happy with final results.
0
Reply
Print Profile
with top, 0.2mm layer, 2 walls, 15% infill
lässt sich super Drucken 👍
0
Reply
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld