Search models, users, collections, and posts
Clamp-On Vise - Fully 3D Printable
IP Report
Print Profile(5)
0.2mm layer, 3 walls, 25% infill
Designer
14.8 h
2 plates
0.16mm layer, 3 walls, 25% infill
Designer
17 h
2 plates
75% scale, a1 mini compatible, 0.2mm layer, 3 walls, 25% infill
8.7 h
3 plates
0.2mm layer, 3 walls, 25% infill
10.5 h
3 plates
Click to see more
Open in Bambu Studio
Boost
7977
20407
948
736
14.5 k
6.1 k
Released
Description
Summary
This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLE
Additional Parts:
3x Retaining Clip.stl
2x Guide Rod A.stl
2x Grip.stl
Assembly (See Pictures):
- Adhere Frame Base Pad TPU to Frame.
- Install Grip TPU to Frame and Vise via dovetail slots.
- Partially thread in Mounting Bolt.
- Thread Mount Plate TPU onto Mounting Bolt.
- Mount the vise to a benchtop to complete the following steps.
- Feed both guide rods through the Frame and Vise.
- Attach one Retaining Clip to the grooved sections at the base of each guide rod.
- Install Threaded Rod all the way through the Frame and Vise.
- Attach the final Retaining Clip to the end of the Threaded Rod.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
Duramic PLA+ / TPU
Grey/BlackLicense
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (948)