Description:

This is a Batmobile (Tumbler design)-inspired back quiver. Although it's designed as a single entity, it's recommended to slice it into smaller printable pieces (you can use PrusaSlicer for that). To reduce the rattle of the arrows, you can place foam inside.

Use straps up to 25mm in width and 2mm in thickness.

Printing Recommendations:

• Material: Choose between PLA or PETG, depending on whether you prioritize flexibility or strength.
• Infill: Set between 20-30%. Modify based on your preferred balance of weight and sturdiness.
• Outer Perimeter: Opt for more than 3 perimeters to ensure enhanced durability.
• Model Dimensions: Given its impressive stature, you may need to slice the model into smaller sections for printing. Post-printing, securely bond the pieces using a high-strength adhesive.
• Layer Height: Opt for greater than 0.2mm to expedite the printing process