Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #6 (0.56mm) swap to Blue Gray
At layer #10 (0.88mm) swap to Scarlet Red
At layer #13 (1.12mm) swap to Ivory White for the rest.