Wall Mount NFC Tag Holder (reusable - thread lock)
Print Profile(1)
Description
NOTE: For most models, it is worth reading the description carefully, and for some it is even necessary.
Wall Mount NFC Tag Holder. Thanks to the threaded closure (PG21), the tag can be easily replaced if damaged. The clamp/pin has a recess, e.g., for a coin, to make it easier to screw/unscrew. Outer ring with light fuzzy skin for better grip.
Model is available in a version with the text “NFC” and without this text. By default, the text is printed with the same filament as the rest, and only the bottom layer style is changed, so that people without AMS can also print this version. Unfortunately, this means that although the NFC text is present, it is difficult to see. If you have AMS, you can set a different color for the "TXT - N," "TXT - F," and "TXT - C" objects, and the text will be clearly visible (though of course, this depends on the colors chosen ;-)).
Inside, there's room for an NFC tag with a maximum diameter of ~27 millimeters. The inner diameter of the "pin holes" is ~4.8 millimeters, ideal for 6 mm mounting pins/screws (head ~8.8 mm).
For super-thin NFC tags, you can use the included “pressure pad”. It probably shouldn't be available, but it's there just in case :-)
Both elements (outer housing and clamp/pin) are fully interchangeable with the following designs:
- Keychain NFC Tag Holder
- Neck NFC Tag Holder
- Multiboard NFC Tag Holder
- Wall Mount NFC Tag Holder
- Strape NFC Tag Holder
 |  |  |
 |  |
Boost Me (for free)
If the model was useful - like and give a boost. It doesn't cost you anything, and for me it's information that it was worth it :-)
Filament in Print Profiles
The filament specified in print profiles is usually just a guideline. It simply must be there. But most often – unless the model description specifically states that a given element must be printed with a specific filament – you can easily change it to the type you want to print the model with. Of course, when making such a decision, it's worth considering not only the type of filament you have, but also what will actually be best for the given print (model, application).
You can change the material type as needed while creating the print (Bambu Studio, Bambu Handy).
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)