This is my first Hueforge project, I found this fan art from @Arles48. I did not create this and found it on a public website. I left the watermark on it to clearly state that this is not my creation and is NOT for commercial use in any shape or form!
I'm a huge Elden Ring fan and wanted to have some Art on my walls, more uploads will follow.
Settings:
0.4 mm Nozzle, textured plate, Bambu X1C
Print at 100% infill with a layer height of 0.08 mm with a base layer of 0.16 mm
Filaments Used:
PLA Sunlu Matte Black Transmission Distance: 0.3
PLA Jayo Matte Dark Gray Transmission Distance: 0.6
PLA Elegoo Matte Light Gray Transmission Distance: 0.3
PLA Bambu Basic Gold Transmission Distance: 5
PLA Das Filament Yellow Transmission Distance: 6
PLA+ Esun Cold White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #9 (0.8 mm) swap to Dark Gray
At layer #11 (0.96 mm) swap to Light Gray
At layer #13 (1.12 mm) swap to Gold
At layer #15 (1.28 mm) swap to Yellow
At layer #19 (1.6 mm) swap to White for the rest
Use the .3mf file for exactly these filaments but change to what you've got in the slicer. For any other settings I used check out the picture. Thanks to @Don Mantis because I used the same settings as for his art.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.