I redid the coloring in hueforge to get it more vibrant. 7 color print

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA BambuLab Matte Dark Brown Transmission Distance: 1.9
PLA BambuLab Matte Mandarin Orange Transmission Distance: 2.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 1.5
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA PolyTerra Muted White Transmission Distance: 0.5
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Dark Brown
At layer #12 (1.04mm) swap to Mandarin Orange
At layer #15 (1.28mm) swap to Scarlet Red
At layer #17 (1.44mm) swap to Lemon Yellow
At layer #21 (1.76mm) swap to Muted White
At layer #22 (1.84mm) swap to Ivory White for the rest.