Twisty Twirl Tub Sub

Twisty Twirl Tub Sub

Boost
98
143
31
GIF
GIF

Print Profile(4)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.16mm layer, 3 walls, 0% infill
0.16mm layer, 3 walls, 0% infill
Designer
2 h
1 plate
5.0(22)

A1 mini, 0.16mm layer, 3 walls, 0% infill
A1 mini, 0.16mm layer, 3 walls, 0% infill
2.5 h
1 plate
5.0(5)

PLA 0.16mm layer, 3 walls, 0% infill
PLA 0.16mm layer, 3 walls, 0% infill
2 h
1 plate
5.0(2)

0.2mm layer, 2 walls, 5% infill
0.2mm layer, 2 walls, 5% infill
1.5 h
1 plate
4.0(2)

Boost
98
143
31
6
258
204
Released

Description

Twist the nose to spin the propellor!
Turn baths into fun seas with this print-in-place, support-free toy submarine.

 

Engaging Playtime: The Twisty Twirl Tub Sub is more than just a toy; it's an interactive experience. With ergonomic finger idents in the nose, children can easily twist or spin the submarine, watching in delight as the propellor whirls. This simple yet captivating mechanism encourages hands-on play and stimulates fine motor skills development.

Innovative Design: The cute Twisty Twirl Tub Sub has no sharp corners and features a print-in-place design that requires no assembly, no supports, and doesn't require infill. Print with child-safe materials to ensure that this submarine can withstand the rigors of bath time exploration.

Water-Friendly Features: Six portholes allow the submarine to dive underwater. They also act as drainage holes to facilitate drying and mold prevention.

Dive into fun with the Twisty Twirl Tub Sub – where every bath becomes an adventure ready to spin up!


A quick and easy print:

  • No assembly required
  • Print-in-place
  • No supports needed
  • No infill needed

Tested print settings:

  • 16mm layer height
  • 3 walls
  • 0% infill
  • Supports disabled

Comment & Rating (31)

Please fill in your opinion
(0/5000)

Print Profile
0.16mm layer, 3 walls, 0% infill
Came out vert nicely and spins very crazy fast and smooth in PETG
0
Reply
Boosted
Print Profile
0.16mm layer, 3 walls, 0% infill
really cool print. printed perfect both times. my daughter loves it
0
Reply
Print Profile
0.16mm layer, 3 walls, 0% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 0% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 0% infill
sooo hübsch! 🥰
0
Reply
Print Profile
A1 mini, 0.16mm layer, 3 walls, 0% infill
Easy to Print
0
Reply
Print Profile
0.16mm layer, 3 walls, 0% infill
loved this sub bath toy, I did have a problem after spinning the noise, it fell off
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
awesome model. some of the overhangs did not print clean on my bambu p1s, but might be an issue of cooling
0
Reply
Print Profile
0.16mm layer, 3 walls, 0% infill
amazing toy.
0
Reply
Print Profile
0.16mm layer, 3 walls, 0% infill
Very cute, my boy loves it
0
Reply