Printed on a P1S with 0.4 nozzle and 0.08 layer height
Designed to be printed without AMS. Print the white backing plate for more even light dispersion, this can be glued in from the back with a few drops of CA-glue even though it's a very snug fit.
The backplate has a hole for a USB-C connector. Connector can be found here.
Also designed in a possibility to hang it over a screw or nail without having any light come through the back of the box.
5V COB Led 6000K, i choose to use them without the controller.
The fit of the backpanel is pretty tight but i would suggest a few drops op CA-glue along the bottom edge
Final dimensions of the box are 202.93mmx126.6mmx38mm.