06/02/2023 Update: Added Pikachu_CombinedBrown_Magnet for people with a medium brown to use for the 2nd darkest color.
For anyone that played Pokémon Gen 1, they know the glory of Chubby Pikachu. Uses some color mixing based on @TheSameNameTwice 's work.
Materials:
- 2 light colors
- 1-2 dark colors
- 5 6x3mm magnets - example
Print Settings:
- Import all models at the same time for alignment
- First Layer Height: 0.12 mm ← Do not skip this step!
- Layer Height: 0.20 mm
- Top/Bottom Layers: minimum 4
- Infill: 15+%
- Printing color-side down on the plate
- Set “light brown” as one of your light colors (yellow).