Bambu Lab Nozzle Wiper
Copyright Claim
Bambu Lab Nozzle Wiper
Boost
106
209
11
Print Profile(1)
With support - 0.2mm layer, 2 walls, 15% infill
15 min
1 plate
Boost
106
209
11
0
221
60
Released
Description
This is the BambuLab Nozzle Wiper
You also need a ptfe tube and the Screw
M2,5x14
M2,5x4
- PLA/PETG/ABS/ASA
- Use Brim
- 100% Infill
- Print it on one of the flat surfaces
- Print with Support
- Be carefull removing supports
Comment & Rating (11)
All
Print Profile
With support - 0.2mm layer, 2 walls, 15% infill
thank you! just broke mine
0
Reply
Print Profile
With support - 0.2mm layer, 2 walls, 15% infill
printed great
0
Reply
Print Profile
With support - 0.2mm layer, 2 walls, 15% infill
worked
(Edited)0
Reply
Print Profile
With support - 0.2mm layer, 2 walls, 15% infill
perfecto. lo he sacado en pla+
0
Reply
I have some extra tubing from my car was wondering if you could make one with the specs for the tubing I have and maybe the tube holder shorter so it can fit? High Performance Silicone Vacuum Hose - 10 feet - .1375" ID (3.5mm)
0
Reply
Print Profile
With support - 0.2mm layer, 2 walls, 15% infill
Prints nice will need to try it in abs as pla is not strong enough.
0
Reply
Print Profile
With support - 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
With support - 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
With support - 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
With support - 0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
© 2024 MakerWorld