Bruce hueforge
*created with filament painting technique using hueforge software.
Remember if you want to scale, do it only with x and y axis, z must be the same as original.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Yellow
PLA BambuLab Basic Jade White
Swap Instructions: if you don't have ams just put pause on specified layers and swap filamen manually
Start with Black
At layer #8 (0.72mm) swap to Yellow
At layer #17 (1.44mm) swap to Jade White for the rest.