If you are using the one-click 3MF file on Makerworld (aka the “print profile” in the top right), all appropriate settings have been applied to the print (PLA filaments)!
Slice it, print it, done.

If you are not using the one-click printing method, or are not using a Bambu printer, read on:

Print Instructions (manual settings):

print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filament Swaps:

• Start with Black
• At layer #9 (0.8mm) swap to Fire Engine Red
• At layer #15 (1.28mm) swap to Beige
• At layer #24 (2mm) swap to White for the rest.

Filaments I've used:

• Black: Extrudr PLA NX2 matt schwarz*
• Fire Engine Red: PLA+ Esun Fire Engine Red*
• Beige: Bambu Lab PLA Basic “Beige”
• White: Extrudr PLA NX2 matt weiß*

Notes:

• *The used link is a so-called affiliate one. When you buy a product using this link, I will receive a small provision. The price itself does not change. Thanks so much for your support :)
• I am not affiliated with the Coca Cola Company or any other license holder nor is this print an official release. It's just a fan and hobby project made at home and should not condone theft of copyrighted material and I don't want to get into even the slightest trouble because of that.