HUEFORGE COCA COLA

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 4 

PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Beige Transmission Distance: 8

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions: Start with Red

At layer #4 (0.4mm) swap to Jade White
At layer #10 (0.88mm) swap to Black
At layer #12 (1.04mm) swap to Beige for the rest.