Pocket Aces - A Magnetic Fidget Toy by Halfway_Engineered

Halfway_Engineered

Toys & Games>Other Toys & Games

GIF

Print Profile(24)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

6x3mm magnets AMS 2 color 0.2mm layer, 2 walls, 15% infill

Designer

34 min

1 plate

5.0(12)

6x2mm magnets AMS 2 color 0.2mm layer, 2 walls, 15% infill

Designer

31 min

1 plate

4.9(7)

5x2mm magnets AMS 2 color 0.2mm layer, 2 walls, 15% infill

Designer

31 min

1 plate

5.0(4)

10x3mm magnets AMS 2 color 0.2mm layer, 2 walls, 15% infill

Designer

32 min

1 plate

5.0(4)

Click to see more

Boost

176

253

297

309

Released

Description

These fidget cards use six or ten magnets to create a satisfying snapping between positions. The print profile will pause the print at the correct height to insert the magnets, and then continue. Print profiles with “no AMS” in the title have an additional pause to manually change the filament color for the top layers.

Ensure that all magnets are embedded in the same direction on the print bed.

Print profiles are currently available for the following magnet sizes:

4x2mm

4x4mm† (uses all 20 magnets from maker's supply magnets)

5x3mm

5x2mm

6x3mm*

6x2mm

7x2mm

7x4mm†

8x3mm*

10x4mm*†

10x3mm

10x2mm

*Strongest versions, these are the magnet sizes I recommend if purchasing magnets specifically for this project

†These models can accept either 4mm thick magnets, or twice as many 2mm thick magnets

Happy to add files for additional magnet sizes on request.

Bill of Materials

Bambu parts

D4x2 mm Round Magnet (20PCS) - CA001

B-CA001

× 1

List other parts

Maker's supply magnets work with the 4x4mm profiles. Larger magnet sizes such as 6x3mm and 8x3mm will produce a stronger snap between positions.

Purchase from Bambu Store

Comment & Rating (76)

@Infest

Print Profile

8x3mm magnets AMS 2 color 0.2mm layer, 2 walls, 15% infill

They turned out even better than expected. Really great and thoughtful design! Thank you again for doing the 8x3mm variant. I was surprised how good and easy the magnets fit. But apart from the design, I see that my gold silk pla needs some drying -.-

@Austin94

Print Profile

6x3mm magnets AMS 2 color 0.2mm layer, 2 walls, 15% infill

Phenomenal print. worked perfect and the person who posted this print was very fast to respond and add a new sized magnet build.

@ASackOPotatoes

Print Profile

6x3mm magnets AMS 2 color 0.2mm layer, 2 walls, 15% infill

Such a fun print to play with. You can even swap them around depending on whether you want to push or pull for the fidget.

@Austin94

The print paused at the right time. There were 10 holes, so I placed magnets in all 10 holes. They fit 100% perfect into the holes. Each magnet popped right in without any effort. Can I also suggest adding a version with Ironing? I think that would take this to the next level! :) Or even adding a design to the backside. Overall I love the look of it. And will recommend everyone to print it!