Rokai Titian [Print In Place] Articulated
Copyright Claim
Rokai Titian [Print In Place] Articulated
Boost
164
245
36
Print Profile(4)
0.28mm layer, 2 walls, 15% infill
Designer
16 h
1 plate
Blade #2 0.2mm layer, 2 walls, 15% infill
Designer
1.8 h
1 plate
Blade #1 0.28mm layer, 2 walls, 15% infill
Designer
47 min
1 plate
Custom, 0.2mm layer, 2 walls, 15% infill
Designer
4.2 h
1 plate
Open in Bambu Studio
Boost
164
245
36
9
363
94
Released
Description
The Rokai Titian is a print-in-place articulated print that can be printed on any Bambulab machine (Bambulab machines have better print tolerances to deal with the joints). This model was created in Blender 4.0! This model was inspired by Pacific Rim (Great Movie) mixed in with some characteristics from Lucky 13.
Accessories: This Model includes two places to hold objects in the hands (left and right hands) and one attachment point on the back with various possibilities. Feel free to make any of your own cosmetic creations for this model!
Renders -
I am 15 years old and I love to make projects like this!
Comment & Rating (36)
All
I have to admit I was skeptical, but that really did print in place and all the joints worked.
I do suggest popping the head off in order to remove support material around it, then put it back on.
Looks cool, nice work.
The designer has replied
3
Reply
Thank you so much for leaving a photo! Im so glad it worked for you! I was wondering if it would work as well for others as it did for me. I do think I will try something with the head to have less supports! :)
1
Reply
Boosted
Print Profile
0.28mm layer, 2 walls, 15% infill
This guy is so cool! I haven’t gotten around to printing any of the swords yet, but I am super impressed with this model!
The designer has replied
1
Reply
Epic!
(Edited)1
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
i like it because its easy to print!
1
Reply
Very nice indeed, you said this was inspired by Pacific rim, and through what I notice it seems to be a combination of Tacit Ronin and Striker Eureka
The designer has replied
1
Reply
Right on!
1
Reply
Yea, I’m a pacific rim nerd, so when I saw the description, I saw it
1
Reply
Are those your favorite jaegers?
1
Reply
YOURE 15!?!? DUDE NICE WORK this has the quality of a seasoned CAD artist keep up the good work. amazing.
The designer has replied
5
Reply
Thank you so much!
2
Reply
Print Profile
Blade #2 0.2mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
THAT LOOKS EPIC!
(Edited)1
Reply
哇！模型设计的真棒，如果零件能按颜色分开就好了！
The designer has replied
1
Reply
I will work on a print profile for that!
1
Reply
Replying to @Quageus
我详细看了你设计的结构，有些结构对于悬垂要求太大了，即便加上了支撑，悬垂的面打印出来也不是很好看，可以尝试优化一下。也可以尝试一下免支撑的设计方案。
1
Reply
Replying to @StarK
I Uploaded a new print profile!
1
Reply
jeez that must have taken hours to make
3
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
Very good model, but i sadly broke some joints while removing the brim and i don't know if it's doable to have a flawless support removal either.
But having a print in place articulated robot that actually works even if it's not perfect is a great feat because all other models I've tried even with assembly required had more problems
The designer has replied
1
Reply
Im sorry about the problems you had with your print. A few days ago I uploaded a better print profile with much less supports so you could try again if you wanted to. Do you mind telling me which joint(s) broke so I can improve the design?
(Edited)2
Reply
Boosted
perfect
1
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld