Nueva version Gandalf creado por IA, realizado con Hueforge para su impresion
print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Jayo Negro Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 6
Swap Instructions:
Start with Negro
At layer #9 (0.8mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Gray
At layer #18 (1.52mm) swap to Jade White for the rest