Spirograph card by Creatività in 3D

Creatività in 3D

Tools>Other Tools

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 15% infill

Designer

1.2 h

1 plate

4.7(7)

Open in Bambu Studio

Boost

154

Released

Description

Spirograph Card

Simple spirograph with 4 different breaks to create "infinite" combinations
3 of the gears (the smaller ones) can be fitted directly into the main board so they don't get lost.
It is printed in a single pass but can be colored as desired. Including a circle, a square and a pentagon for decoration

Used PLA Overture

Enjoy

Comment & Rating (10)

@VCP3D

Print Profile

0.2mm layer, 3 walls, 15% infill

Passt

@3D_Prince

cool I actually thought about making something like this can you shell all the flat area to make it thinner in your design I think it will help to save a lot of time and material in printing and it will not compromise the strength significantly. I think everywhere outside of the gears could be 0.8mm thick I think you could make this smaller and more compact even with all the same size gears. I was about to print this but then I saw it was going to take over an hour to print

(Edited)

The designer has replied

@YahooJAPAN

Thank you for your suggestion. The model is made in this way to have more resistance and for the use of both ballpoint pens and markers for children. By making it thinner and rotating the fringes it often bends and skips the turn of the pen. You can reduce the fill or scale it if you want to save time or increase the extrusion size to 0.24 and reduce the walls to 2 ;)