Which Kallax should this be? I tested it on a 2x2 and 3x4 Kallax - as you can see in the picture, the larger one doesn't fit - the smaller ones do. Printet with your Profile on a A1 mini with Bambu PLA
I'd recommend checking the size specified. 50.25mm and 16mm. could you please link me the 2x2 ones you mean? the images attached don't really seem to be exactly what it was intended for, at least based on image 2
Perfect for older and generic Kallax units..
More recent units (last least within the last 3 years in the US) are thinner around the border, about 37mm.
For example, I have a set of Kallax units that are at least 7 years old and the large clips are perfect, but the do not work on my newer units that are between 2-4 years old. They also work on my generic wal-mart kallax look-a-likes. Since I needed these for both my older units and wal-mart units, these are perfect.
These clips are for the older style kallax units. Measure the width of your Kallax unit and you'll see its around 37mm, while the newer still is 50.2ish mm.