Sadness cursed into hueforge

created with filament painting technique using hueforge software.

Remember if you want to scale, do it only with x and y axis, z must be the same as original.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: if you don't have ams just put pause on specified layers and swap filamen manually
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Latte Brown
At layer #15 (1.28mm) swap to Jade White for the rest