IKEA PAX (58cm deep) Five Build Plates Holder
Print Profile(2)
Bill of Materials
- Set of two 6.3×13 mm hinge screws (the same type IKEA uses, e.g. Hettich) x 1: Optional, but makes it more secure
Description
Boost Me (for free)
If you like what I do, please consider boosting and rating after printing. It costs you nothing and means the world to me!
This is a custom-designed build plate holder made specifically for the IKEA PAX wardrobe system (58 cm depth). It mounts to the rear rows of factory holes, keeping the holder recessed toward the back of the cabinet so your plates are neatly stored without interfering with doors, clothes rails, or shelves.
No drilling or modifications to the wardrobe are required—installation uses only standard 6.3×13 mm hinge screws (the same type IKEA uses, e.g. Hettich). The model includes printed alignment pins that slot into the PAX hole pattern for perfect positioning, making mounting quick, repeatable, and rock-solid.
Features
- ✔️ Fits IKEA PAX 58 cm deep wardrobes
- ✔️ Stores up to 5 build plates securely
- ✔️ Mounted on rear hole columns, positioned away from the front edge
- ✔️ No drilling needed – uses existing factory holes
- ✔️ Works with standard 6.3×13 mm hinge screws
- ✔️ Integrated printed alignment pins
- ✔️ Clean minimalist look, optimized for FDM printing
- ✔️ Print left or right orientation (separate build plates)
Printing recommendations
- Material: PETG recommended for rigidity
- 4 walls with 5 top and bottom shell layers
- Infill: cross hatch 10%
- Printed pins are included in the model and require supports (enabled in the project)
Perfect for keeping your build plates organized and protected while making smart use of your PAX wardrobe space.
I also have versions for 3-plate and 4-plate storage ready (see photos) — just leave a comment, and I’ll upload them.
Boost Me (for free)
If you like what I do, please consider boosting and rating after printing. It costs you nothing and means the world to me!
You may also like one of my other models!
Click on the image to go to the model's page
 |  |
 |  |
 |  |
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)