Bambulab Logo side window, double sheet with magnetic positioning for P1 series enclosure.

This is a flexible window to ensure chamber temperature and an on-deman full enclosed setup.

I've printed it with internal sheet in petg and the external one in pla.

Don't change the orientation as it is on the profile if you want the textured side on the outside for the logo sheet.

Used a total of 12 magnet, 10x2mm placed as you can see in the last photo.

Choose if you want to use the 2,5mm spacer or the 3mm one, depends on the magnet you have.

A total of 4 Handle and 8 spacers as to be printed, if you want only two handles (front or upper part) print only 2 handle and a total of 10 spacers.

The logo can be modified by modifying the two parts of the solid sheet.

I've assembled the two parts of every sheet with a tiny strip of paper and cyanoacrylic superglue as you can see in the pictures.

If you have any question or request ask in the comments!