Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Red
    At layer #13 (1.12mm) swap to Blue
    At layer #20 (1.68mm) swap to Jade White for the rest.
 

I just used the colors I had on hand