coin bank

created in fusion 360

coin slot comfortably takes all euro coins, with screw-in bottom

photos show the coin_bank in brick red petg-cf and bottom screw lid in matte black pla

• 0.16mm layer height
• 15% gyroid infill
• detect thin layers

note - the top of the coin_bank does have some more challenging overhangs, however i have found no issues with it printing successfully on any of the test prints i've made. the interior surface on that top section isn't perfectly clean, but seeing as that is on the inside, it doesn't really impact the overall aesthetics or functionality

adding two print profiles:

• two_materials · 3mf includes two plates, one for the coin bank and other for the lid, to allow to print in different colors and/or materials · which is what is shown on the photos
• single_material · one plate only for single material/color

if you enjoy this 3D model and are able to, please consider supporting my work by > buying me a coffee < your contribution goes a long way in fuelling future creations. thank you for being a supporter!

note: all photos uploaded are of the actual printed model, taken inside a lightbox or in natural light on top of a desk / table