Just a Bitcoin coaster. Printed in Eryone Dark Gold Silk PLA which gave it a wood appearance, also printed in copper and gold, each with a black top graphic surface filament.

The 3mf includes the pause at layer 26. Change here from your base filament to the graphic top surface filament. For those who haven't done this “trick” before - when the printer pauses, click “close” on the dialog that the machine presents and then go ahead and unload your base filament and then load your graphic top surface filament and then click “resume”.

You can print this using the AMS as well and you can just delete the pause at layer 26 or simply click resume on the printer when it stops. The printer will then swap filaments and continue.

If you're using the STL make sure you add a pause at layer 26!

PRINT INFO:
Printer : X1 Carbon
Profile : 0.20mm Standard
Material : PLA
Brim : No

Support : No
Filament Used : ~25g
Print Time : ~42 min
Sparse Infill : 15%
Infill pattern : Grid

Powered by Make My Sign from MakerWorld (https://makerworld.com/makerlab/MakeMySign)