The Tanita KD810 is a tempered glass weighing scale and the glass top can shatter if dropped. This print is designed to replace the broken glass piece.
To install, turn the scale upside down and use a H2.5 allen key to remove the damaged part. Reuse the screws to attach the new part. The holes are not threaded and you will use the screw itself to create the threads. This ensures a tight fit and makes sure the screws do not loosen due to vibration. Do not over tighten.
Print flat side down with 3 perimeter walls for strength. I used ABS for my print on an Energetic PEI sheet.
Comment & Rating (0)