Used the artwork from dndbeyond to create this Hueforge of an ancient red dragon.
.08mm layers with .16mm initial layer and 100% infill.
I used the following filaments:
Bambulab Matte PLA - Charcoal
eSUN PLA+ - White
Bambulab Matte PLA - Mandarin Orange
Overture Matte PLA+ - Dark Red
Start with the Charcoal
Switch to Dark Red at layer 10
Switch to Mandarin Orange at layer 13
Switch to White at layer 16
Return to Charcoal at layer 22
Uses 19.54g of filament total, with a print time of 3h19m.