Summary

This is a Raspberry Pi 3/4 Case with external connectors.

What you need:

• SSD to USB Adapter
• 2.5" SSD/HDD
• 5V 40mm Fan
• some Cables
• some M3x8 Screws
• 5V LED Switch 16mm
• 20mm On/Off Switch
• Short Cat 5e LAN Cable 15cm
• Dual USB Panel Cable (Back USB)
• Single USB Panel Cable (Front USB)
• RJ45 Panel CAT 5e Mount
• Some Heatsinks for your PI (recommended but not needed)

Items from Amazon.de:

• https://www.amazon.de/gp/product/B00NEMGCIA/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
• https://www.amazon.de/gp/product/B00M31X4AC/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
• https://www.amazon.de/gp/product/B011M8YACM/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
• https://www.amazon.de/gp/product/B075TZ9JBT/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
• https://www.amazon.de/gp/product/B00PYX3IWK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
• https://www.amazon.de/gp/product/B00S6HGY72/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Print Settings

Supports:                     

Yes

Resolution: 

0.3mm

Infill:                     

25%

Filament:

Generic PLA                 Red and White