Extension box for WAGO 221 splicing connectors
Copyright Claim
Extension box for WAGO 221 splicing connectors
Boost
733
1325
129
Print Profile(5)
3 wires, 0.2mm layer
Designer
54 min
1 plate
2 wires, 0.2mm layer
Designer
46 min
1 plate
4 wires, 0.2mm layer
Designer
1.1 h
1 plate
5 wires, 0.2mm layer
Designer
1.2 h
1 plate
Click to see more
Open in Bambu Studio
Boost
733
1325
129
38
816
444
Released
Description
Cable extension box using the WAGO 221 inline splicing connector.
Benefits
- Compact.
- Very strong strain relief.
- Mountable with countersunk screws.
How to make
- Print in PETG, because it is more fire retardant than ABS or PLA.
- Insert WAGO 221-2401 or WAGO 221-2411 inline splicing connector.
- Secure with M3 screws and nuts. Suggest screws are 14mm with hex head.
If this model useful for you, please support me by clicking on the “Boost” button above.
- At 100 boots, I will make and release a model that can split the connection.
Video:
Comment & Rating (129)
All
Boosted
Print Profile
2 wires, 0.2mm layer
Perfect, PETG, no profile changes needed
The designer has replied
1
Reply
I have made many test-print in PETG. Please consider donating a boost token.
0
Reply
Boosted
Replying to @PerMejdal
Done
0
Reply
Replying to @jpp123
Thank you :-)
0
Reply
Boosted
Print Profile
2 wires, 0.2mm layer
works perfectly with PETG & also Bambu PLA
The designer has replied
1
Reply
I have updated the models and print profiles:
* Easier to push in and remove the splice connectors.
* The walls no longer bend out when connectors are pushed in.
(Edited)0
Reply
Thank you for the boots token.
0
Reply
Print Profile
2 wires, 0.2mm layer
Great
The designer has replied
1
Reply
I have made a special profile for transparant fillament. You sould try it.
0
Reply
Boosted
Print Profile
3 wires, 0.2mm layer
easy and quick to print. printed in super-filament.de PETG grey aluminum RAL 9007
The designer has replied
1
Reply
Nice to see you printed it in PETG. Please consider giving it a boost token.
(Edited)0
Reply
Works real great and is a lot more compact thean other wago or similar solutions
The designer has replied
0
Reply
Great to see you here at MakerWorld. I have updated the 3 wire version to have 10,2 mm wide hole for the cable. So it is compatible with flat wide cables, like 14/2 Romex.
0
Reply
Print Profile
3 wires, 0.2mm layer
Printed perfect with Bambu Basic PETG.
Wago fits with a nice snap! Excellent design. Nice and tidy and screw mounts for a secure connection I know will last.
0
Reply
Print Profile
3 wires, 0.2mm layer
Die Wagoklemmen passen perfekt und sitzen sicher in ihren Slots, lassen sich aber auch leicht wieder entfernen.
Auch die Schrauben und Muttern passen perfekt in ihre Slots. Die zwei Slots um die Box an der Wand zu befestigen lassen sich auch ohne Bohrer durchstechen.
Hält super zusammen auch wenn die Kabel mit Stoff ummantelt und damit etwas dicker sind.
Ich werde wohl noch Kappen in der selben Farbe drucken, denn die Schrauben waren zu hell und die Farbe ist etwas zu dunkel in den Löchern.
0
Reply
works really good with pla and fits 👍
0
Reply
Print Profile
2 wires, 0.2mm layer
The designer has replied
1
Reply
Excellent, and with all the stringing, I see that you have used PETG, as I recommended.
0
Reply
Boosted
this is so good! thanks a lot. this was one of the first models I ever printed and I did several reprints since then. do you know that Wago has also 3D models of users hosted on their website wago.com maybe you want to share it there too?!
The designer has replied
2
Reply
Hi. I am happy to hear you like the model.
I have uploaded the model to WAGO Creators, where it is one of the most popular models. I received a polo t-shirt from WAGO.
Link: https://wago-creators.com/design/306
Link: https://wago-creators.com/design/307
0
Reply
Boosted
ok, sorry didn‘t check there before posting! congrats for the T-Shirt 😄
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld