Overhang, stringing, moisture test
Print Profile(1)
Description
This product is inexpensive, and together with Bambu’s documentation, it allows you to experiment with all the individual settings for your specific machine and filament.
Overhang: https://wiki.bambulab.com/en/filament-acc/filament/print-quality/overhang
Stringing: https://wiki.bambulab.com/en/filament-acc/filament/print-quality/stringing-oozing
Moisture: https://wiki.bambulab.com/en/filament-acc/filament/dry-filament
Thanks to Bambu for the detailed descriptions.
-eSun Silk Aqua PLA was stringing a lot for me. Solution: I use 220 °C for the first layer, and 190 °C for all other layers. I would start with this, and only then adjust the other variables, because this gives the most visible improvement. It is recommended to reduce the temperature in 5–10 °C steps.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)