pjdaws

cover

2023-09-25_ka4b7woz5wh3.jpg

2023-09-25_c2szocy373gx.jpg

2023-09-25_ltrkoxze5wd4.jpg

IMG_5670_964df399-13e3-4ee9-b19a-d4951f6ce2b5.webp

plate_1.webp

plate_1.png

ArtificerMakes

<p>Good enough print, requires odd orientation as set in the .3mf, or far too many supports. Didn't spot originally it's intended for the aluminium unistrut not the normal steel one so had to take a dremel to it for it to fit like in the picture. Should be a perfect fit for the aluminium one though.</p>

0.2mm layer, 4 walls, 30% infill

<p>End-cap for 42x22mm extruded Aluminium Unistrut roof rails. It has a slot underneath for water to drain out. Can be glued in place or you can drill the side of the Unistrut for a self tapping screw. Item is a press fit in my application but depends on the tolerances of your printer and the extrusion.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Raise3D</p><p class="detail-setting printer"><strong>Printer: </strong><div><p>N2</p></div><p><strong>Rafts:</strong></p><p>No</p><p class="detail-setting supports"><strong>Supports: </strong><div><p>Yes</p></div></p></p>Category: Automotive

Unistrut Roof Rail end

Global

Print Profile(1)

Description

Print Settings

Comment & Rating (0)

License

Related Models

A Salt Weapon - Bug-A-Salt Mods

Fiamma Bike Rack - Rail End Cap

Fibonacci Spiral Book End

profile end cap 30x30 mm