advent calendar Santa Claus Christmas sleigh

Thanks for reaching out!

Here we have a rule not to use a single Ai image. This means every image you see in posts or descriptions are real photos.

Another rule is not to upload designs that are not tested by us  first. So what you see is what you will print indeed.

Hope you like our work and maybe support us. Remember that you can support us for free just by like, follow, share and boost our work.

This year's advent calendar for Christmas!

The Santa's sleigh this time!

An Advent calendar is a special calendar that counts the days to Christmas through the month of December. So you have to hit print as soon as possible!

If you wish take a look and on the house advent calendar:

I you have already printed the house i would like to inform you that the drawers are the same so you have to print only the sleigh if you wish!

Designed this in fusion:

About the model:

• Can be printed without ams

• Can be printed in A1 mini

  

• Can be printed without supports. some of you maybe want to use supports for the drawers though

  The image below is a drawer printed without supports. If you are uncomfortable with that, slice the drawers with your supports.

  i prefer a little air heat and fix with finger there.

  

• No external hardware is needed to assembly the calendar. Only glue for assembly.
• the drawers are 36x28x29mm internal dimensions without scaling it. remember that if you have a 255x255 plate you can resize the whole project at 140%. This means that you can go up to 50x38x41mm!
• You can print all the 24 drawers without scaling them on a single plate too if you want to be the same color. All the drawers can fit in a plate A1 mini also.
• Total size after assembly:  340mm x 190 mm x 67mm

• this is an 120% compared to the original size:

  

About the profile:

• the profile uses an ams for the drawers but if you dont have one please add a pause at layer 280:

  

• There are 7 plates in total , 2 for the body, 2 for the gold parts and 3 for the drawers.

  

• Used Hilbert curve for the top surface of the drawers only with a modifier. You can change this if you wish though.

   

  

   

  

  

   

• total time is about 20 hours and total filament needed around 850 grams:

   

  

   

• Feel free to resize it if you have bigger build plates. Waiting a feedback for this if someone decide to do it.
• Feel free to use your colors.

Assembly instructions:

You can watch the assembly in video on you tube here:

• place the back body the front body the middle fence and the front and back decoration all in a flat surface laying down and glue them together and let them cure.

  

• Glue the decors ( tree, star, bell) on front and on back.

  

• Assembly the runners with glue and let them cure. 

  

   

  Pay attention cause the 2 holders for the runner have specific orientation to look better:

  

• Glue the assembled body on top of the runners and then glue the back and front fence and let them cure.

  

• Last step place the axle in the front hole and tap the caps with a drop of glue on both ends. This axle is if you wish to add a rope.

  

  

• Now you ready to put the drawers with some gifts inside. I have uploaded some Christmas minis for that purpose if you wish you can check them here:

  

  

• Santa and grinch on the profile photo are balancing toys i designed and you can find them here:

  

Added in my seasonal collection. If you wish you can check the other models there:

https://makerworld.com/en/collections/7707010-seasonal

🙏 Please don't leave negative feedback if you don't doublecheck that you used your own well working filament profiles and be very sure that you build plate is well cleaned! 

The designs we upload are well tested so you don't have to worry about them. we never upload a design without fully tested them first!

🙏 Feel free to Follow, Boost, Like & Share this work — your support means the world and helps us bring more designs.

ways you can support our work:

• https://buymeacoffee.com/orama3dvibes

• Dont forget that you can support us for free just by following and sharing our facebook, instagram, patreon, youtube and makerworld accounts.