Christmas self balancing toys

Thanks for reaching out!

Here we have a rule not to use a single Ai image. This means every image you see in posts or descriptions are real photos.

Another rule is not to upload designs that are not tested by us  first. So what you see is what you will print indeed.

Hope you like our work and maybe support us. Remember that you can support us for free just by like, follow, share and boost our work.

Description

These are some functional toys following the series I have already uploaded.

the theme of these science balancing toys is inspired from Christmass characters.

You will find toys inspired from the following characters:

• Santa clause
• snowman
• cookieman
• grinch
• rudolph

About the model:

• it consist of 6 profiles. Every profile represent a movie character!

• every profile consist of one character with all the accessories.

  

• tried to keep it at max 4 colors so it can be printed with one ams.
• no supports needed.
• there are only 7 fillament changes and arround 3 grams of poop!
• added 2 clips in case one brake.
• designed to be printed on 0.28 layer height.
• a1 mini friendly

ASSEMBLY INSTUCTIONS:

• place the character on the weight with the axis:

   

  

   

• Attach the weight with the holes. pay attention to push it all the way 
  so no gap is present between the final assembly. 

  This is critical otherwise the wheels may not spin freely:

   

  

   

• pass the axis through the first wheel. orientation doesn't matter.

  Then pass the character through the axis and finally pass the other wheel:

   

  

  

   

• Finally attach the clip to the axis to hold all them together.

  first insert it to the half of the slot and then just slide it until it locks.

   

  

• Last bust most important step!

  HAVE FUN !

  

  

troubleshooting not balancing:

pay attention that the weights are printed at 100% infill as my profile!

its strongly recomended to print my profile to avoid faults….

troubleshooting not running:

if you are in this then maybe the fillament or printer needs better calibration.

The wheels must spin freely without any friction for this to work. if you are completely sure that the 2 weights are well pressed together against the character then try to print only the axle little longer. feedback i have is that if you resize 104 % only on Y long axis then the wheels will spin freely. 

You can watch the video below to see the assembly and demo:

user presentations:

added them in my seasonal collection and on my toys and games collection:

you will find many other balancing toys in the toys and games collection too.

🙏 Please don't leave negative feedback if you don't doublecheck that you used your own well working filament profiles and be very sure that you build plate is well cleaned! 

The designs we upload are well tested so you don't have to worry about them. we never upload a design without fully tested them first!

🙏 Feel free to Follow, Boost, Like & Share this work — your support means the world and helps us bring more designs.

ways you can support our work:

• https://buymeacoffee.com/orama3dvibes

• Dont forget that you can support us for free just by following and sharing our facebook, instagram, patreon, youtube and makerworld accounts.