以100%填充打印,层高0.08mm,基层0.16mm
交换说明:
从黑色开始
在第9层(0.8mm)处,换成灰色
在#12层(1.04mm)处,换成红色
在#14层(1.2mm),将其余部分换成白色,不要改变尺寸打印。
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Gray
At layer #12 (1.04mm) swap to Red
At layer #14 (1.2mm) swap to White for the rest.Do not change the size to print.