Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA HATCHBOX BLACK Transmission Distance: 1
PLA YEETIN GRAY Transmission Distance: 2
PLA YEETIN BROWN Transmission Distance: 5.2
PLA YEETIN PINK Transmission Distance: 4
PLA YEETIN LATTE Transmission Distance: 9.6
PLA YEETIN FROTHED MILK Transmission Distance: 5
PLA YEETIN OFF WHITE Transmission Distance: 8.8
PLA SOLUTECH WHITE Transmission Distance: 8

Swap Instructions:
Start with BLACK
At layer #7 (0.64mm) swap to GRAY
At layer #8 (0.72mm) swap to BROWN
At layer #10 (0.96mm) swap to PINK
At layer #14 (1.2mm) swap to LATTE
At layer #15 (1.28mm) swap to FROTHED MILK
At layer #19 (1.6mm) swap to OFF WHITE
At layer #24 (2mm) swap to WHITE for the rest.