190mm Hueforge Interlock Frames; No Glue Required by mikelb0013

mikelb0013

Generative 3D Model>Hueforge & Lithophane

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 10% infill, Cubic Infill, Normal Auto Supports

Designer

6.4 h

4 plates

4.6(5)

Minimal/Way Less Supports: .2 layer height, 10% infill, 3 walls

Designer

5.6 h

4 plates

5.0(1)

Open in Bambu Studio

Boost

100

142

134

Released

Description

Update Version 2 (3/4/24):

Added print profile V2 (190mmFramesV2MW profile) that requires WAY less supports (only needed for key overhangs on two frames, other frames need 0 supports.

Be sure that hueforge print dimensions* are set to 190 x 190 to fit this updated frame version otherwise V1 with deeper pockets will be needed.

*Do NOT change the dimensions of the Frames, they are set with specific tolerances and any adjustment large or small will effect how they slot together

200mm Interlocking Frame can be found https://makerworld.com/en/models/217207#profileId-236230

180mm Interlocking Frame can be found https://makerworld.com/en/models/226156#profileId-243905

Original (2/24/24)

190mm Interlocking Frames for Ninja turtle Hueforge
Use supports

If you print the Top Right (Mikey 190) or Bottom Left (Donny 190) no key slots protrude out and can be used as single use.
Top Row picture slots come from the top down (Leo and Mikey). Bottom Row Slots come from the left (Donny) or right (Raph)
- Pictures can be taken out and replaced at all times, nothing is blocked
- Can hold up to 3mm Thick Lithos or hueforge

Hueforge links: If you happen to grab the 200x200 ones, you will need to trim off 5mm on each size. I apparently only grabbed the Michelangelo 200x200 the rest all seemed to be 190mm anyways. Even trimming isn't a big deal as its all black anyways.

teenage mutant ninja turtles

Comment & Rating (12)

@user_2005960670

Printed these out for a friend and his kids, absolutely amazing.

The designer has replied

@bombsurace

Heck yea! Glad they worked out well for yoU!

@Kyfry85

i imagine that I missed something but I adjusted all the frames to be 190 x 190, have two of them printed out, but none of the slots are lining up

The designer has replied

@bombsurace

The frame itself does not need to be adjusted (I apologize for wording and adjusted it to avoid confusion) , if you adjusted dimensions on those, they would not match up as tolerances were designed in at original sizing. Any Hueforge print itself (say the turtles for example) need to be 190x190 to slot in and fit (do not change the z height as that will cause the Hueforge print to change itself)

@Kyfry85

Replying to @bombsurace :

All good! Will definitely be back once I'm done printing!

@Perky

Print Profile

Minimal/Way Less Supports: .2 layer height, 10% infill, 3 walls

perfect tolerance

@Jbuilds69

Print Profile

0.2mm layer, 2 walls, 10% infill, Cubic Infill, Normal Auto Supports

@user_933451388

Print Profile

0.2mm layer, 2 walls, 10% infill, Cubic Infill, Normal Auto Supports

@user_2397767777

Print Profile

0.2mm layer, 2 walls, 10% infill, Cubic Infill, Normal Auto Supports

(Edited)

Support Issue

The designer has replied

@bombsurace

I have updated Version 2 added to the model for WAYY less to no supports needed. Supports only needed on keys and not for the inner channel Be sure the print dimensions are 190x190. Also have a 200mm frame in files, and will be adding a 180mm frame soon