tabulak

cover

429094334_366488012924668_1875684044163324213_n_f8d16d6f-ba2c-4d02-931d-aadd54a57e12.jpg

429117701_3600021023596368_3817408456824321060_n_3b92be59-856c-461d-a178-35d010fd10be.jpg

plate_1.png

SuTzu

20250602_080143900_iOS.jpg

Walls 3 and infill density to 20%.This profile prints petg a bit slower to reduce the overhang underextrusion ugliness.&nbsp;It can take a fair bit of weight as it is, the weakest link is the small flat arms which tend to flex when leaning quite hard on it.&nbsp;Hardware needed:4 x M8 X 402 x M6 X 40 (M6 is a bit loose which causes the shelf to be on a slight downward lean, but M8&#39;s you can&#39;t get the latch past to collapse it down)2 x M5 x 20 (M4 may be a bit loose) for the latching (the heads/nuts will be proud and contact the arms but I don&#39;t know what hardware the designer intended or used for the latching)6 x screws for the bracket to your shelf, mine needed 6g x 12mm but depending on your shelf thickness requirements yours may change

All parts one print plate

I designed shelf that I can fold so it doesn't take up space when you don't need it.

Foldable shelf

ASIA

Print Profile(1)

Description

Comment & Rating (11)

License

Related Models